1. Install two new dowel pins (Figure 6, Item 4) on inlet manifold (Figure 6, Item 1).
2. Install new gasket (Figure 6, Item 3) on inlet manifold (Figure 6, Item 1).
3. Install inlet manifold (Figure 6, Item 1) on engine.
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
4. Apply sealing compound on 15 bolts (Figure 6, Item 2) and install 15 bolts on inlet manifold (Figure 6, Item 1).
Torque bolts in sequence shown (Figure 6) to 16 lb-ft (22 Nm).
Figure 6. Inlet Manifold Torque Sequence.