WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Idler and yoke weighs approximately 400 lb (181 kg).
5. Attach lifting support on yoke (Figure 3, Item 2).
6. Using lifting device, with idler (Figure 3, Item 1) and yoke (Figure 3, Item 2) both supported, remove idler and
yoke from machine. Place idler and yoke on flat level surface.
7. Remove lifting devices from idler (Figure 3, Item 1) and yoke (Figure 3, Item 2).
Figure 3. Yoke Support.