TM 5-2410-241-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
0012
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL HOURS
RIGHT SIDE
18
Before
Overall View
Check right side of machine for evi- Class III leak or damage that
dence of leakage or damage.
would impair operation is
evident.
19
Before
0.2
Hydraulic Tank
WARN I N G
Sight Gauge
At operating temperature, hydraulic tank is hot and under
pressure. Do not remove hydraulic tank filler cap when
engine is running. Remove the filler cap only after it is cool
enough to touch with bare hands.
Remove filler cap slowlyto relieve pressure.
Failure to follow these warnin s may result in injury or
g
death to personnel.
a. Check hydraulic fluid level on
Hydraulic fluid level is low.
sight gauge.
b. Clean area around hydraulic
tank filler cap and slowly remove
hydraulic tank filler cap.
11, 12, 13 or 16) to maintain level
between full mark and add mark on
sight gauge. Refer to LO 5-2410-
241-13 for proper oil based on
outside temperature.
d. Install hydraulic tank filler cap.
0012-13