N OT E
Tag hoses to aid installation.
3. Remove clamp (Figure 2, Item 2) and hose (Figure 2, Item 1) from line (Figure 2, Item 3).
4. Loosen two clamps (Figure 2, Item 5) and remove line (Figure 2, Item 4) from two hoses (Figure 2, Item 6).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Engine weighs approximately 3,750 lb (1,700 Kg)
Engine must be properly supported before removing bolts.
5. Install suitable lifting device on front of engine.
6. Remove two bolts (Figure 2, Item 7) and washers (Figure 2, Item 8) from engine support (Figure 2, Item 9).
Figure 2. Engine Support to Frame.