INSTALL ENGINE ON STAND CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Starter weighs approximately 80 lb (36 kg).
16. With assistance, remove three bolts (Figure 26, Item 2) and starter (Figure 26, Item 3) from engine.
17. Remove gasket (Figure 26, Item 1) from starter (Figure 26, Item 3). Discard gasket.
Figure 26. Starter.