WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Crankshaft damper weighs approximately 70 lb (32 kg).
1. Attach lifting device to crankshaft damper (Figure 1, Item 1).
2. Remove six bolts (Figure 1, Item 4), washers (Figure 1, Item 3), crankshaft damper (Figure 1, Item 1) and
adapter (Figure 1, Item 2) from engine (Figure 1, Item 5).
3. Place crankshaft damper (Figure 1, Item 1) on flat level surface and remove lifting device.
Figure 1. Front Housing Cover.