TM 5-2410-241-23-2
0185
HYDRAULIC SYSTEM OIL FILTER CHANGE
000185
WARN I N G
Oil should be warm to ensure it drains co pletely. Use caution to protect against burns,
m
when draining oil.
Contact with oil can damage skin. Wear gloves when handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immedately wipe up any spills. Failure to follow this
i
warning may cause injury.
At operating temperature, the hydrauic tank is hot and under pressure.
l
Hot oil and components can cause personal injury. Do not allow hot oil or components to
contact skin.
Remove the filler cap slowly only when theengine is stopped, and the filler cap is cool
enough to touch with your bare hand. Remove the filler cap slowly to relieve pressure.
Failure to follow these warnings may cause injury or death to personnel.
N OT E
This procedure will replace one hydraulic syste oil filter. Follow same procedure for other
m
hydraulic system oil filter.
Care must be taken to ensure that fluidsare contained during performance of inspection,
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
0185-2