TM 5-2410-241-23-3
0264
CLEANING AND INSPECTION
000264
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
2. Inspect inner and outer sleeve bearings. If sleeve bearings are damaged, replace radiator guard (WP 0205).
END OF TASK
INSTALLATION
000264
N OT E
This procedure is for the right yoke. Use the same procedure to install the left yoke.
1. Install new lip seal (Figure 4, Item 2) with lip on outside of radiator guard (Figure 4, Item 1) hole.
Figure 4. Bearing and Bearing Angle.
0264