BULKHEAD BRACKET REMOVAL CONTINUED
N OT E
Brackets are all removed using the same general method. This procedure covers removal
of one bracket from machine. Repeat steps to remove bracket from opposite side of
1. Disconnect two hose fittings (Figure 1, Item 1) and remove two O-rings (Figure 1, Item 6) and bulkhead nut
(Figure 1, Item 7) from tube assembly (Figure 1, Item 5). Discard O-rings.
2. Remove two bolts (Figure 1, Item 3), washers (Figure 1, Item 4), and bracket (Figure 1, Item 2) from machine.
Figure 1. Tube and Bracket.
END OF TASK