Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
NOT FULLY MISSION
a. Check winch assembly for
Class III leak or damage that
damage, fluid leaks, wear, or visible
would impair operation is
cable damage. Refer to
evident, winch inoperative if
TB 43-0142, Safety Inspection and
required for mission.
Testing Of Lifting Devices.
b. Clean area around oil level
Oil level low if required for
check plug and filler plug.
c. Remove oil level check plug. If
oil level is correct, oil should trickle
from plug opening.
d. Remove oil filler plug. Add oil
required through filler plug opening.
Refer to LO 5-2410-241-13 for
proper oil based on outside
e. Install oil filler plug and oil level
Figure 22. Winch Oil Level Check and Fill Plugs.