CLEANING AND INSPECTION
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
FLOOD LAMP ASSEMBLY
C AU T I O N
Do not touch the glass surface of a halogen bulb with bare fingers, as the surface will be
exposed to the salts and oils in the hand. If glass is touched, it must be cleaned
immediately with a gentle solvent such as alcohol. Failure to follow this caution will result
in early bulb failure.
1. Install new bulb (Figure 11, Item 3) in lamp assembly (Figure 11, Item 1).
2. Secure bulb in place by engaging bale wires (Figure 11, Item 4) on lugs (Figure 11, Item 2).
Figure 11. Bulb Assembly.