38
TM 5-2410-240-23-3
FIELD MAINTENANCE
-
FUEL HOSE REPLACEMENT
0174
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
0
(WP 0289, Item 51)
0
Equipment Conditions
0
Gloves, Rubber (S0208) (WP 0289, Item 53)
0
Machine parked (TM 5-2410-240-10)
Goggles (S0209) (WP 0289, Item 53)
0
0
Front floor plate removed (WP 0205)
0
Materials/Parts
Rear floor plate removed (WP 0205)
0
0
Cap set, protective (WP 0290, Item 4)
0
Drawings Required
0
Rag, wiping (WP 0290, Item 21)
0
TM 5-2410-240-24P, Figure 80
Tag, marker (WP 0290, Item 30)
0
0
Tiedown strap (WP 0290, Item 31)
Estimated Time to Complete
0
0
O-ring (6) if not equipped with arctic kit heater
2.0 Hr
0
0
O-ring (8) if equipped with arctic kit heater
0
REMOVAL
000174
1. Loosen two lower bolts (Figure 1, Item 5).
2. Remove two upper bolts (Figure 1, Item 2) and washers (Figure 1, Item 1) and detach lower access plate
(Figure 1, Item 3) from machine (Figure 1, Item 4).
Figure 1. Lower Access Plate and Retaining Hardware on Rear of Machine.
0174
