TM 5-2410-240-23-3
0255
ASSEMBLY
000255
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
N OT E
Sealing surface needs to be dry and free of debris and solvent.
Apply primer to glass surface only where prim r is missing or bare glass is exposed. Allow
e
adhesive primer to dry before installing glass.
Apply primer to door sealing surface only where seal adhesive is missing or bare metal is
exposed. Allow adhesive primer to dry before applying seal adhesive.
1. Apply smooth, even layer of adhesive primer (Figure 18, Item 2) on glass surface and door sealing surface
(Figure 18, Item 1).
Figure 18. Applying Glass Primer.
0255
