• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 1. Winch Harness, Hoses, and O-rings.
Figure 4. Lower Winch Mounting Bolts.

Field Maintenance Manual 3 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  967    968    969    970    971  972  973    974    975    976    977  
img
.
TM 5-2410-240-23-3
0265
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Winch weighs approximately 1,925 lb (873 kg).
Illustration shows debris guards and winch retaining hardware on left side and top of
winch. Additional debris guards and retaining hardware are located underneath and on
right side of winch.
6. Attach lifting device (Figure 3, Item 1) on winch (Figure 3, Item 2). Support winch with lifting device.
Figure 3. Attaching Lifting Device on Winch.
0265
0265-4


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.