TM 5-2410-241-10
0007
WARNING AND MESSAGE LABELS CONTINUED
.
KEY
LABEL IDENTIFICATION
DEFINITION
1
Air Filter Identification
To avoid engine damage, use only Caterpillar radial seal air fil-
ters as replacement filters. Refer to WP 0014 for air filter
removal and installation procedures.
2
CBRN Exposure
WARNING. If CBRN exposure is suspected, all air filter media
will be handled by personnel wearing full CBRN protective
equipment. Failure to comply could result in serious injury or
death.
Structural damage, an overturn, modification, alteration, or
3
Do Not Weld on the ROPS/FOPS
improper repair can impair this structure's protection capability,
Structure
thereby voiding this certification.
Do not weld on or drill holes in the structure. This will void the
certification.
This machine has been certified to the standards listed on the
decal. Maximum mass of machine, which includes operator
and attachments without a payload, should not exceed mass
listed on decal.
4
Pivot Shaft Oil
Identifies pivot shaft oil fill location.
5
Improper Connections For Jump
Explosion Hazard! Improper jumper cable connections can
cause an explosion resulting in serious injury or death. Batter-
Start Cables
ies may be located in separate compartments. Refer to WP
0006 for the correct slave starting procedure.
6
Hearing Protection Required
WARNING: High-intensity noise. Ear protection required when
operating this vehicle or within 26 feet of this vehicle when
operating.
7
High Voltage
WARNING: Shock Hazard. Could cause serious injury or
death.
8
No Step
WARNING: Fall hazard, do not step. Could cause serious
injury, or death.
9
Explosive Hazard
WARNING: Vapor Explosion. Could cause serious injury or
death.
10
Hot Coolant Under Pressure
Pressurized system! Hot coolant can cause serious burns,
injury or death. To open the cooling system filler cap, stop the
engine and wait until the cooling system components are cool.
Loosen the cooling system pressure cap slowly in order to
relieve the pressure.
0007-3