TM 5-2410-241-10
0006
OPERATION USING NIGHT VISION DEVICES
0006
WARN I N G
Do not turn on dome lamp while wearing night vision devices. Failure to follow this
warning may cause momentary blindness, resulting in possible loss of machine control,
injury, or death to personnel.
After machine is started, adjust Messenger display backlight setting to lowest possible setting (WP 0005),
eliminating most ambient light within the machine cab to allow for use of night vision devices.
END OF TASK
OPERATING PORTABLE FIRE EXTINGUISHER
0006
1. Remove fire extinguisher from bracket (WP 0002).
2. Hold fire extinguisher upright. Stand back 8 ft (2.4 m) from base of fire, point nozzle toward fire, and pull safety
pin.
3. Squeeze lever, discharging chemical at base of fire. Use a side-to-side motion to spread chemical.
4. After using fire extinguisher, order new fire extinguisher.
END OF TASK
STOPPING ENGINE IF AN ELECTRICAL MALFUNCTION OCCURS
0006
1. Ensure parking brake is engaged (WP 0004).
2. Turn engine start switch to OFF position (WP 0004).
3. Turn battery disconnect switch (Figure 4, Item 1) to OFF position.
4. Notify Field Maintenance.
Figure 4. Battery Disconnect Switch.
0006
END OF TASK