TM 5-2410-241-10
0006
OPERATION IN SANDY OR DUSTY AREAS CONTINUED
2. Keep machine rolling through sand without straining engine or powertrain. If machine gets stuck, refer to
Recovery and Towing in this work package.
3. Monitor engine coolant, hydraulic oil temperature, and torque converter oil gauges on monitor system more
frequently during operation (WP 0004).
4. If air filter restriction indicator illuminates on the monitor system, check and clean or replace engine air filter
elements (WP 0014).
5. Check hydraulic cylinders frequently. Do not allow dust, dirt, or sand to collect on these items, as the smooth,
polished working surfaces can be damaged from the abrasive nature of the elements (WP 0012).
Parking
0006
1. Park machine (WP 0005).
2. Perform all After PMCS procedures (WP 0012).
3. Clean spouts on fuel containers and areas around filler cap and filler tube before adding fuel.
4. Cover windshield and other cab windows to guard against sand blasting.
5. If machine is to be parked for long periods of time, prepare machine for long-term storage (WP 0001).
END OF TASK
OPERATION IN SALTWATER AREAS
0006
C AU T I O N
To ensure salt residue has been removed, all rock guards and belly pans must be
removed and surrounding areas thoroughly flushed with fresh water. Notify Field
Maintenance.
1. Keep the machine as clean as possible. Wash down with fresh water after use.
2. Inspect wiring connections closely for corrosion.
3. Keep lubrication points clean and well lubricated IAW LO 5-2410-241-13.
END OF TASK
OPERATION AT HIGH ALTITUDES
0006
N OT E
Engine operates at less than peak performance at high altitudes.
1. Coolant level and engine indicators must be watched closely (WP 0012).
2. Add coolant if necessary (WP 0012).
END OF TASK
OPERATION IN SNOW AND ON ICE
0006
1. Fuel tank should be kept full. Keep snow and ice away from fuel filler (WP 0012).
2. Clean snow away from outside indicators.
0006-7