TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Windshield Wipers and
149.Using digital multimeter (WP
1. If continuity is NOT found, pro-
Washers Do NOT Oper-
0296), test for continuity between
ceed to step 150.
ate - Continued
pin 9 and pin 6 on cab harness
2. If continuity is found, replace
connector H-C6 (WP 0018, Figure
Fuse #1 (TM 5-2410-241-10) and
114).
cab harness (WP 0254). Ensure
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
150.Lower windshield wiper control
plate and switches from headliner
(WP 0234).
151.Disconnect 529 WHITE left wiper
washer supply connector (WP
0018, Figure 153) from left door
wiper switch.
152.Using digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
Fuse #1 (TM 5-2410-241-10) and
pin 9 and pin 6 on headliner har-
left door wiper switch (WP 0234).
ness connector HA-C2 (WP 0018,
Ensure all harness connectors
Figure 115).
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
2. If continuity is found, replace Fuse
#1 (TM 5-2410-241-10) and head-
liner harness (WP 0232). Ensure
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
153.Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
154.Disconnect washer pump har-
ness connector HH-C4 (WP 0018,
Figure 192) from right door
washer pump.
155.Replace Fuse #1 (TM 5-2410-
241-10).
156.Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
0022-64
