TM 5-2410-241-23-3
0200
DISASSEMBLY CONTINUED
3. Remove two supports (Figure 10, Item 1) and grommets (Figure 10, Item 2) from machine.
4. Remove two mountings (Figure 10, Item 3) from machine.
Figure 10. Grommets.
0200
END OF TASK
CLEANING AND INSPECTION
000200
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
ASSEMBLY
000200
1. Install two mountings (Figure 10, Item 3) on machine.
2. Install two grommets (Figure 10, Item 2) and supports (Figure 10, Item 1) on machine.