TM 5-2410-240-10
0006
OPERATION IN SANDY OR DUSTY AREAS CONTINUED
2. Whenever operating in sandy or dusty areas, you should:
a. Service engine air cleaner more frequently.
b. If machine overheats, stop and perform troubleshooting procedures.
c.
Ensure engine oil filler tube and hydraulic fluid filler tube are cleaned before dipsticks are removed to
check fluid levels. Clean accumulations of sand and dirt from around fluid filler locations before checking or
adding fluids.
d. Clean spouts of fuel containers and areas around filler cap on fuel tank before adding fuel. Under
extremely sandy or dusty conditions, filter fuel when filling fuel tank.
e. Cover windshield to protect against sand blasting.
f.
Clean, inspect, and lubricate more frequently.
g. Check hydraulic cylinders and blade mounting at chassis and C-Frame frequently. DO NOT allow dust,
dirt, or sand to collect in these areas.
END OF TASK
OPERATION IN SALTWATER AREAS
0006
C AU T I O N
To ensure salt residue has been removed, all rock guards and belly pans must be
removed and surrounding areas thoroughly flushed with fresh water. Failure to observe
these cautions could result in damage to equipment.
1. Keep the machine as clean as possible. Wash down with fresh water after use.
2. Inspect wiring connections closely for corrosion.
3. Keep lubrication points clean and well lubricated.
END OF TASK
OPERATION AT HIGH ALTITUDES
0006
N OT E
Engine operates at less than peak performance at high altitudes.
1. Coolant level and engine indicators must be watched closely.
2. Add coolant if necessary.
END OF TASK
OPERATION IN SNOW AND ON ICE
0006
1. Fuel tank should be kept full. Keep snow and ice away from fuel filler.
2. Clean snow away from outside indicators.
Driving
0006
1. Accelerate slowly to avoid spinning tracks.
2. Drive at slower speeds.
0006-7
