TM 5-2410-240-10
0007
WARNING MESSAGE LABELS AND STENCILS CONTINUED
KEY
LABEL IDENTIFICATION
WARNING DEFINITION
1
Hot Fluid Under Pressure
Pressurized system! Hot coolant can cause serious burns,
injury or death to personnel. To open the cooling system filler
cap, stop the engine and wait until the cooling system
components are cool. Loosen the cooling system pressure
cap slowly in order to relieve the pressure.
2
Do Not Operate
DO NOT operate or work on this machine unless you have
read and understand the instructions and warnings in this
manual.
3
Seat Belt
A seat belt should be worn at all times during machine
operation to prevent serious injury or death in the event of an
accident or machine overturn. Failure to wear a seat belt
during machine operation may result in serious injury or death.
4
Do Not Weld On the ROPS/FOPS
Structural damage, an overturn, modification, alteration, or
improper repair can impair this structure's protection capability,
Structure
thereby voiding this certification.
DO NOT weld on or drill holes in the structure. This will void
the certification.
This machine has been certified to the standards listed on
decal. Maximum mass of machine, which includes operator
and attachments without a payload, should not exceed mass
listed on decal.
5
Hearing Protection Required
WARNING. High intensity noise. Ear protection required when
operating this vehicle or within 26 ft (8 m) of this machine
when operating.
6
Shipping Data Plate
Provides visual aid in rigging machine for lifting or tying down
machine.
7
CBRN Exposure
WARNING. If CBRN exposure is suspected, all air filter media
will be handled by personnel wearing full CBRN protective
equipment. Failure to comply could result in serious injury or
death to personnel.
8
High Fuel Pressure
DO NOT loosen any high-pressure fuel lines when the engine
is running. Wait 60 seconds after engine has stopped to allow
pressure to purge before any service or repair is performed on
engine fuel lines.
0007-3
