TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0681-05 Parking Brake Sole-
5. Check for diagnostic codes (WP
0681-05 Code Active - Proceed to
noid Current Below Normal -
step 6.
Continued
0681-06 Code Active - Replace park-
all harness connectors are recon-
nected. Verify proper operation of
machine (TM 5-2410-240-10).
6. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
7. Disconnect pump harness to
engine harness connector PH-C1
engine harness to platform har-
ness connector EN-C21 (WP
Continuity - Proceed to step 9.
0283), test for continuity between
pin 9 on pump harness to engine
ness (WP 0046). Ensure all harness
harness connector PH-C1 (WP
connectors are reconnected. Verify
0018, Figure 205) and pin 1 on
proper operation of machine (TM 5-
Pump harness parking brake
2410-240-10).
solenoid connector PH-C3 (WP
Continuity - Proceed to step 10.
0283), test for continuity between
pin 8 on pump harness to engine
ness (WP 0046). Ensure all harness
harness connector PH-C1 (WP
connectors are reconnected. Verify
0018, Figure 205) and pin 2 on
proper operation of machine (TM 5-
Pump harness parking brake
2410-240-10).
solenoid connector PH-C3 (WP
0283), test for continuity between
Continuity - Replace pump harness
pin 9 on pump harness to engine
(WP 0046). Ensure all harness con-
harness connector PH-C1 (WP
nectors are reconnected. Verify
0018, Figure 205) and all other
proper operation of machine (TM 5-
pins on pump harness to engine
2410-240-10).
harness connector PH-C1 (WP
11. Disconnect platform harness to
engine harness connector PL-
engine harness to platform har-
ness connector EN-C15 (WP
0020-65