TM 5-2410-240-23-1
0021
Table 1. Cab Troubleshooting Without Codes. - Continued.
0021
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. All Front and Rear Flood Lamps
6. Using a digital multimeter,
Voltage Within 18 to 26 Volts -
Do Not Work - Continued
measure for voltage (WP
Turn LH wiper switch to OFF
0283) between lamp relay
position (TM 5-2410-240-10).
fuse top terminal B4 (Figure
Turn battery disconnect switch to
37) and ground.
OFF position (TM 5-2410-240-10).
Disconnect C-C4 (WP 0018,
Figure 16) from LH wiper switch
(WP 0018, Figure 64).
Replace flood lamp switch (WP
0018, Figure 60).
Connect C-C6 (WP 0018, Figure
18) on LH wiper switch (WP 0018,
Figure 64).
Install front control panel on right
side console (WP 0217).
For D6K Dozer with Ripper, install
ripper operation control handle
(WP 0218). For D6K Dozer with
Winch, install winch operation
control handle (WP 0217).
Install fuse panel side cover from
machine (TM 5-2410-240-10).
Install fuse panel front cover on
machine (TM 5-2410-240-10).
Install new lamp relay fuse on fuse
block.
Verify proper operation of flood
lamps (TM 5-2410-240-10).
0021-95