TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Rear Window Wiper
7. Using digital multimeter, test for
No Continuity - Proceed to step 8.
Does Not Operate Prop-
continuity (WP 0283) between
Continuity - Replace chassis harness
erly Continued
harness connector CH-C26 (WP
(WP 0153, WP 0154). Ensure all har-
0018, Figure 97) terminal 1 and
ness connectors are reconnected.
cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
8. Using digital multimeter, test for
No Continuity - Proceed to step 9.
continuity (WP 0283) between
Continuity - Replace chassis harness
harness connector CH-C26 (WP
(WP 0153, WP 0154). Ensure all har-
0018, Figure 97) terminal 1 and
ness connectors are reconnected.
all other terminals in connector
Install a new #26 15A fuse (TM 5-
CH-C26 (WP 0018, Figure 97).
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
9. Disconnect harness connector
PL-C1 (WP 0018, Figure 214)
from harness connector C-C12
(WP 0018, Figure 22).
10. Using digital multimeter, test for
No Continuity - Proceed to step 11.
continuity (WP 0283) between
Continuity - Replace platform har-
harness connector PL-C18 (WP
ness (WP 0150, WP 0155). Ensure all
0018, Figure 226) terminal 32 and
harness connectors are reconnected.
cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
11. Using digital multimeter, test for
No Continuity - Proceed to step 12.
continuity (WP 0283) between
Continuity - Replace platform har-
harness connector PL-C18 (WP
ness (WP 0150, WP 0155). Ensure all
0018, Figure 226) terminal 32 and
harness connectors are reconnected.
all other terminals in connector
install a new #26 15A fuse (TM 5-
PL-C18 (WP 0018, Figure 226).
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
12. Disconnect rear window wiper
switch harness connector C-C8
(WP 0018, Figure 20) from rear
window wiper switch.
13. Using digital multimeter, test for
No Continuity - Proceed to step 14.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
rear window wiper switch harness
harness (WP 0228). Ensure all har-
connector C-C8 (WP 0018, Figure
ness connectors are reconnected.
20) terminal 6 and cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
0022-24
