TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Left Door Wiper Does
18. Using digital multimeter, test for
No Continuity - Replace platform
continuity (WP 0283) between
Not Operate Properly
harness (WP 0150, WP 0155).
harness connector PL-C24 (WP
Continued
Ensure all harness connectors are
0018, Figure 228) terminal 3 and
reconnected. Verify proper operation
harness connector PL-C1 (WP
of machine (TM 5-2410-240-10).
0018, Figure 214) terminal 18.
Continuity - Proceed to step 19.
19. Disconnect left door wiper/washer
switch harness connector C-C6
(WP 0018, Figure 18) from left
door wiper/washer switch.
20. Using digital multimeter, test for
No Continuity - Replace lower cab
continuity (WP 0283) between left
wiring harness (WP 0228). Ensure all
door wiper/washer switch harness
harness connectors are reconnected.
connector C-C6 (WP 0018, Figure
Verify proper operation of machine
18) terminal 2 and harness con-
(TM 5-2410-240-10).
nector C-C12 (WP 0018, Figure
Continuity - Proceed to step 21.
22) terminal 18.
21. Remove fuse #12 (TM 5-2410-
240-10).
22. Using digital multimeter, test for
No Continuity - Replace fuse panel
continuity (WP 0283) between
harness (WP 0201). Ensure all har-
harness connector FP-C3 (WP
ness connectors are reconnected.
0018, Figure 168) terminal 23 and
Verify proper operation of machine
upper terminal of fuse #12.
(TM 5-2410-240-10).
Continuity - Proceed to step 23.
23. Disconnect harness connector C-
C40 (WP 0018, Figure 30) from
harness connector FP-C5 (WP
0018, Figure 170).
24. Using digital multimeter, test for
No Continuity - Replace fuse panel
continuity (WP 0283) between
harness (WP 0201). Ensure all har-
harness connector FP-C5 (WP
ness connectors are reconnected.
0018, Figure 170) terminal 5 and
Verify proper operation of machine
upper terminal of fuse #12 (TM 5-
(TM 5-2410-240-10).
2410-240-10).
Continuity - Proceed to step 25.
25. Using digital multimeter, test for
No Continuity - Replace lower cab
continuity (WP 0283) between left
wiring harness (WP 0228). Ensure all
door wiper/washer switch harness
harness connectors are reconnected.
connector C-C6 (WP 0018, Figure
Verify proper operation of machine
18) terminal 3 and harness con-
(TM 5-2410-240-10).
nector C-C40 (WP 0018, Figure
Continuity - Replace left door wiper/
30) terminal 5.
washer switch (WP 0212). Ensure all
harness connectors are reconnected.
Verify proper operation of machine
(TM 5-2410-240-10).
0022-28