TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Left Door Wiper Does
20. Using digital multimeter, test for
No Continuity - Proceed to step 21.
continuity (WP 0283) between
Not Operate Properly
Continuity - Replace platform har-
harness connector PL-C24 (WP
Continued
ness (WP 0150, WP 0155). Ensure all
0018, Figure 228) terminal 3 and
harness connectors are reconnected.
all other terminals in connector
Install a new #12 15A fuse (TM 5-
PL-C24 (WP 0018, Figure 228).
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
21. Disconnect harness connector C-
C40 (WP 0018, Figure 30) from
harness connector FP-C5 (WP
0018, Figure 170).
22. Using digital multimeter, test for
No Continuity - Proceed to step 23.
continuity (WP 0283) between
Continuity - Replace fuse panel har-
harness connector FP-C5 (WP
ness (WP 0201). Ensure all harness
0018, Figure 170) terminal 5 and
connectors are reconnected. Install a
cab ground.
new #12 15A fuse (TM 5-2410-240-
10). Verify proper operation of
machine (TM 5-2410-240-10).
23. Disconnect left door wiper/washer
switch harness connector C-C6
(WP 0018, Figure 18) from left
door wiper/washer switch.
24. Using digital multimeter, test for
No Continuity - Proceed to step 25.
continuity (WP 0283) between left
Continuity - Replace lower cab wiring
door wiper/washer switch harness
harness (WP 0228). Ensure all har-
connector C-C6 (WP 0018, Figure
ness connectors are reconnected.
18) terminal 1 and cab ground.
Install a new #12 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
25. Using digital multimeter, test for
No Continuity - Proceed to step 26.
continuity (WP 0283) between left
Continuity - Replace lower cab wiring
door wiper/washer switch harness
harness (WP 0228). Ensure all har-
connector C-C6 (WP 0018, Figure
ness connectors are reconnected.
18) terminal 2 and cab ground.
Install a new #12 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
0022-32