TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Left Door Wiper Does
17. Disconnect left door wiper/washer
Not Operate Properly
switch harness connector C-C6
Continued
(WP 0018, Figure 18) from left
door wiper/washer switch.
18. Using digital multimeter, test for
No Continuity - Replace lower cab
continuity (WP 0283) between left
wiring harness (WP 0228). Ensure all
door wiper/washer switch harness
harness connectors are reconnected.
connector C-C6 (WP 0018, Figure
Verify proper operation of machine
18) terminal 6 and harness con-
(TM 5-2410-240-10).
nector C-C12 (WP 0018, Figure
Continuity - Proceed to step 19.
22) terminal 30.
19. Disconnect harness connector C-
C40 (WP 0018, Figure 30) from
harness connector FP-C5 (WP
0018, Figure 170).
20. Using digital multimeter, test for
No Continuity - Replace lower cab
continuity (WP 0283) between
wiring harness (WP 0228). Ensure all
rear window wiper switch harness
harness connectors are reconnected.
connector C-C6 (WP 0018, Figure
Verify proper operation of machine
18) terminal 5 and harness con-
(TM 5-2410-240-10).
nector C-C40 (WP 0018, Figure
Continuity - Proceed to step 21.
30) terminal 11.
21. Using digital multimeter, test for
No Continuity - Replace fuse panel
continuity (WP 0283) between
harness (WP 0201). Ensure all har-
harness connector FP-C5 (WP
ness connectors are reconnected.
0018, Figure 170) terminal 11 and
Verify proper operation of machine
upper terminal of fuse #26 (TM 5-
(TM 5-2410-240-10).
2410-240-10).
Continuity - Replace left door wiper/
washer switch (WP 0212). Ensure all
harness connectors are reconnected.
Verify proper operation of machine
(TM 5-2410-240-10).
Test Step 6.
1. Disconnect left door washer pump
harness connector WP-C5 (WP
0018, Figure 234) from left door
washer pump.
2. Using digital multimeter, check for
No Continuity - Replace left door
continuity (WP 0283) between left
washer pump (WP 0223). Ensure all
door washer pump harness con-
harness connectors are reconnected.
nector WP-C5 (WP 0018, Figure
Install a new #26 15A fuse (TM 5-
234) terminal 1 and 2.
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
Continuity - Proceed to step 3.
0022-36