TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Left Door Wiper Does
9. Disconnect harness connector
Not Operate Properly
PL-C1 (WP 0018, Figure 214)
Continued
from harness connector C-C12
(WP 0018, Figure 22).
10. Using digital multimeter, test for
No Continuity - Proceed to step 11.
continuity (WP 0283) between
Continuity - Replace platform har-
harness connector PL-C18 (WP
ness (WP 0150, WP 0155). Ensure all
0018, Figure 226) terminal 34 and
harness connectors are reconnected.
cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
11. Using digital multimeter, test for
No Continuity - Proceed to step 12.
continuity (WP 0283) between
Continuity - Replace platform har-
harness connector PL-C18 (WP
ness (WP 0150, WP 0155). Ensure all
0018, Figure 226) terminal 34 and
harness connectors are reconnected.
all other terminals in connector
Install a new #26 15A fuse (TM 5-
PL-C18 (WP 0018, Figure 226).
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
12. Disconnect left door wiper/washer
switch harness connector C-C6
(WP 0018, Figure 18) from left
door wiper/washer switch.
13. Using digital multimeter, test for
No Continuity - Proceed to step 14.
continuity (WP 0283) between left
Continuity - Replace lower cab wiring
door wiper/washer switch harness
harness (WP 0228). Ensure all har-
connector C-C6 (WP 0018, Figure
ness connectors are reconnected.
18) terminal 6 and cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
14. Disconnect harness connector C-
C40 (WP 0018, Figure 30) from
harness connector FP-C5 (WP
0018, Figure 170).
15. Using digital multimeter, test for
No Continuity - Proceed to step 16.
continuity (WP 0283) between left
Continuity - Replace lower cab wiring
door wiper/washer switch harness
harness (WP 0228). Ensure all har-
connector C-C6 (WP 0018, Figure
ness connectors are reconnected.
18) terminal 5 and cab ground.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
0022-38