TM 5-2410-240-23-2
0052
INSTALLATION CONTINUED
4. Install three clips (Figure 7, Item 20) and bracket (Figure 7, Item 17) on lower harness (Figure 7, Item 16).
N OT E
Install lower harness as noted during removal.
5. Install lower harness (Figure 7, Item 16) on engine (Figure 7, Item 10).
N OT E
Install electrical connectors as noted during removal.
6. Connect fuel injection pump solenoid connector (Figure 7, Item 19) on engine (Figure 7, Item 10).
7. Connect fuel injection pump position sensor connector (Figure 7, Item 18) on engine (Figure 7, Item 10).
8. Connect engine oil pressure sensor connector (Figure 7, Item 15) on engine (Figure 7, Item 10).
9. Connect engine speed sensor connector (Figure 7, Item 13) on engine (Figure 7, Item 10).
10. Connect engine ECM connector (Figure 7, Item 11) on engine (Figure 7, Item 10) and tighten bolt (Figure 7,
Item 12).
11. Connect fuel injector connector (Figure 7, Item 8) on engine (Figure 7, Item 10).
12. Connect waste gate solenoid connector (Figure 7, Item 7) on engine (Figure 7, Item 10).
13. Connect fuel rail pressure sensor connector (Figure 7, Item 6) on engine (Figure 7, Item 10).
14. Connect connectors (Figure 7, Items 4 and 5) on valve cover (Figure 7, Item 9).
15. Connect air pressure sensor connector (Figure 7, Item 3) on engine (Figure 7, Item 10).
16. Connect intake air temperature sensor connector (Figure 7, Item 2) on engine (Figure 7, Item 10).
17. Connect coolant temperature sensor connector (Figure 7, Item 1) on engine (Figure 7, Item 10).
0052-8