TM 5-2410-240-23-2
0085
DRAIN ENGINE OIL
00085
WARN I N G
Plate will fall when bolts are removed. Support plate while removing bolts. Failure to follow
this warning may cause injury to personnel.
1. Remove three bolts (Figure 1, Item 1), washers (Figure 1, Item 2), and plate (Figure 1, Item 3) from engine
bottom guard assembly (Figure 1, Item 4).
Figure 1. Engine Bottom Guard.
0085
2. Position drain pan under machine and drain valve (Figure 2, Item 1).
WARN I N G
Engine oil should be warm to ensure it drains completely from crankcase. Use caution to
protect against burns, when draining oil.
Contact with engine oil can damage skin. Wear gloves when handling engine oil. If oil
contacts skin, wash it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Refer to local procedures and plans for storage and disposal of drained fluids.
Failure to follow these warnings may cause injury.
