TM 5-2410-240-23-2
0161
CLEANING AND INSPECTION
000161
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0281).
END OF TASK
FILLING
000161
1. Apply lubricating oil on two new O-rings (Figure 1, Item 3).
2. Install two new O-rings (Figure 1, Item 3) on drain plug (Figure 1, Item 4) and fill plug (Figure 1, Item 1).
3. Install drain plug (Figure 1, Item 4) in drain hole (Figure 1, Item 5). Tighten drain plug to 130 10 lb-ft (176
14 Nm).
4. Slowly add 1.2 gal. (4.5 L) of oil in fill hole (Figure 1, Item 2) until oil is at bottom of fill hole.
5. Install fill plug (Figure 1, Item 1) in fill hole (Figure 1, Item 2). Tighten fill plug to 130 10 lb-ft (176 14 Nm).
END OF TASK
FOLLOW-ON TASKS
000161
Verify correct operation of winch (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0161-3/(4 blank)