TM 5-2410-240-23-3
0231
CLEANING AND INSPECTION
000231
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000231
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
The operator platform weighs approximately 1,500 lb (680 kg).
1. Attach lifting device to operator platform (Figure 5, Item 1).
2. Using lifting device, install operator platform (Figure 5, Item 1), eight washers (Figure 5, Item 2), and bolts
(Figure 5, Item 3) on machine.
3. Install washer (Figure 5, Item 5) and bolt (Figure 5, Item 4) on operator platform (Figure 5, Item 1) and remove
lifting device.
0231-7