TM 5-2410-240-23-3
0232
REMOVAL CONTINUED
5. Position two protective covers (Figure 2, Item 6) aside.
6. Remove two nuts (Figure 2, Item 4), washers (Figure 2, Item 3), and positive battery cables (Figure 2, Item 5)
and two washers (Figure 2, Item 2) from bulkhead connector (Figure 2, Item 1).
7. Remove nut (Figure 2, Item 10), washer (Figure 2, Item 11), and clamp (Figure 2, Item 7) from machine.
N OT E
Note location and quantity of tiedowns straps to aid installation.
8. Remove tiedown strap (Figure 2, Item 8) from connector (Figure 2, Item 9). Discard tiedown strap.
9. Disconnect connector (Figure 2, Item 12) from connector (Figure 2, Item 9).
Figure 2. Positive Battery Cables.
0232