2
TM 5-2410-240-23-3
FIELD MAINTENANCE
-
SPECIAL/FABRICATED TOOLS
0291
Hydraulic Pressure Test Hose and Gauge, Hydraulic Pressure Test Jumper Hose
INITIAL SETUP
Tools and Special Tools
Tools and Special Tools Continued
0
0
Tool Kit, General Mechanic's
Gloves, Rubber (S0208)
(WP 0289, Item 51)
(WP 0289, Item 53)
0
0
Adapter, Gauge to Hose (WP 0289, Item 2)
Goggles (S0209) (WP 0289, Item 53)
0
0
Coupler, Hydraulic Hose, Quick Connect
Hose Assembly, Hydraulic Test/Jumper
(WP 0289, Item 12)(4)
(10,000 psi Long) (WP 0289, Item 28)
0
0
Fitting, Hydraulic Hose (WP 0289, Item 17)
0
Materials/Parts
0
Nitrogen Charging Kit (WP 0289, Item 22)
0
Tag, marker (WP 0290, Item 30)
0
WARN I N G
DO NOT disconnect or remove any hydraulic system hoses, tubes, or fittings unless
engine is shut down and hydraulic system pressure has been relieved. Tighten all
connections before applying pressure. Escaping hydraulic fluid under pressure can
penetrate skin.
At operating temperature, hydraulic oil is hot.Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in performa ce of maintenance can be very slippery.
n
Immediately wipe up any spills.
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure.
Failure to follow these warnings may result in injury or death to personnel.
0291-1
