TM 5-2410-241-23-1
0019
Table 1. Engine Troubleshooting Procedures - Continued.
0019
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Engine Cranks But Will
5. Ensure fuel system is primed.
1. If problem is found, verify
Not Start - Continued
Refer to Priming Fuel System
correct operation of machine
(TM 5-2410-241-10).
2. If fuel system is OK, proceed to
step 6.
6. Inspect for restricted fuel lines.
1. If problem is found, verify
correct operation of machine
(TM 5-2410-241-10).
2. If fuel system is OK, proceed to
step 7.
7. Check fuel pressure (WP 0025).
1. If problem is found, verify
correct operation of machine
(TM 5-2410-241-10).
2. If fuel pressure is OK, proceed to
step 8.
8. If temperature is below 32F (0C)
1. If problem is found, verify
inspect ether injection system
correct operation of machine
(TM 5-2410-241-10).
2. If either injection system is OK,
replace engine (WP 0057).
0019-3