TM 5-2410-241-23-1
0019
Table 2. Engine Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3-11 Cylinder #3 Injector
17. Perform Injector Solenoid Test
1. If "OPEN" displayed, replace
Fault - Continued
engine main wiring harness
(WP 0055). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If "SHORT" displayed, replace
engine ECM (WP 0101). Ensure
all harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
18. Connect engine harness connec-
tor N-C2 (WP 0018, Figure 7)
on valve cover side connector
NN-C1 (WP 0018, Figure 8).
19. Remove valve cover (WP 0106),
and disconnect injector wire
(Figure 4, Item 1).
Figure 4. Cylinder #3 Injector Fault Code.
019