TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. If continuity is found, proceed to
Not Engage - Continued
0296), test for continuity between
step 32.
pin 2 on blower motor harness
connector EE-C8 (WP 0018, Fig-
ceed to step 28.
ure 167) and pin 6 on blower
motor harness connector EE-C8
28. Disconnect 522 WHITE thermo-
Figure 168) from thermostat
switch.
1. If continuity is found, proceed to
0296), test for continuity between
step 30.
pin 6 on blower motor harness
connector EE-C8 (WP 0018, Fig-
blower motor harness (WP 0219).
ure 167) and 522 WHITE thermo-
Ensure all harness connectors
are reconnected. Verify correct
Figure 168).
operation of machine (TM 5-2410-
241-10).
30. Disconnect 200 BLACK thermo-
Figure 169) from thermostat
switch.
1.
If continuity is found, replace ther-
0296), test for continuity between
mostat switch (WP 0219). Ensure
pin 2 on blower motor harness
all harness connectors are recon-
connector EE-C8 (WP 0018, Fig-
nected. Verify correct operation of
ure 167) and 200 BLACK thermo-
machine (TM 5-2410-241-10).
2.
Figure 169).
blower motor harness (WP 0219).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
0022-117