TM 5-2410-241-23-1
0027
AIR INLET AND EXHAUST SYSTEM INSPECTION CONTINUED
9. Inspect clamp (Figure 1, Item 7) and connection between pre-cleaner hose (Figure 1, Item 3) and muffler
(Figure 1, Item 9) for looseness and damage.
a. Tighten clamp if loose or replace clamp if damaged.
b. If clamp and connection have neither of these conditions, proceed to step 10.
10. Inspect turbocharger elbow (Figure 1, Item 15) and aftercooler housing (Figure 1, Item 12) for cracks, air
leakage, and loose fasteners.
a. If loose, tighten fasteners.
b. Replace turbocharger elbow (WP 0062) and/or aftercooler housing (WP 0068) if cracked, or evidence of
leakage is found.
c.
If turbocharger elbow and aftercooler housing have none of these conditions, proceed to step 11.
11. Inspect turbocharger elbow (Figure 1, Item 15) and aftercooler housing (Figure 1, Item 12) for evidence of oil.
a. If oil is found, inspect turbocharger to determine cause of oil. Refer to turbocharger inspection in this work
package.
b. If turbocharger elbow and aftercooler housing have no evidence of oil, proceed to step 12.
Figure 1. Air Hoses and Charge Air Cooler.
0027