TM 5-2410-241-23-1
0045
REMOVAL CONTINUED
9. Remove two bolts (Figure 5, Item 5), washers (Figure 5, Item 4), and muffler (Figure 5, Item 6) from muffler
bracket (Figure 5, Item 1).
10. Remove tiedown straps (Figure 5, Item 8) from harness bracket (Figure 5, Item 7). Discard tiedown straps.
11. Remove two bolts (Figure 5, Item 10), washers (Figure 5, Item 11), and harness bracket (Figure 5, Item 7) from
muffler bracket (Figure 5, Item 1).
12. Disconnect harness (Figure 5, Item 9) from engine temperature sensor (Figure 5, Item 13).
13. Move wiring harness (Figure 5, Item 9) to the side.
14. Remove bolt (Figure 5, Item 3) and washer (Figure 5, Item 2) from muffler bracket (Figure 5, Item 1).
15. Remove bolts (Figure 5, Item 10), washers (Figure 5, Item 11), and muffler bracket (Figure 5, Item 1) from
hood (Figure 5, Item 12).
Figure 5. Muffler Bracket.
0045
END OF TASK
CLEANING AND INSPECTION
00045
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK