TM 5-2410-241-23-2
0059
REMOVAL CONTINUED
96. Remove bolt (Figure 32, Item 1), washer (Figure 32, Item 7) and bracket (Figure 32, Item 6) from engine.
Position hose (Figure 32, Item 5) and bracket aside.
97. Remove two bolts (Figure 32, Item 2), washers (Figure 32, Item 4), coupling (Figure 32, Item 3) and drain
hoses (Figure 32, Item 5) from engine.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
The engine assembly weighs approximately 3,750 lb (1,700 kg).
98. Remove engine from engine stand and place on a flat surface.
Figure 32. Drain Hoses.
0059
END OF TASK
CLEANING AND INSPECTION
00059
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK