TM 5-2410-241-23-2
0068
REMOVAL CONTINUED
N OT E
Mark, tag, and note routing of harness to aid installation.
19. Disconnect connector (Figure 9, Item 1) from sensor (Figure 9, Item 2).
20. Remove air inlet temperature sensor (Figure 9, Item 2) from aftercooler (Figure 9, Item 3).
21. Remove O-ring (Figure 9, Item 7) from sensor (Figure 9, Item 2). Discard O-ring.
22. Remove 12 bolts (Figure 9, Item 6), washers (Figure 9, Item 5), aftercooler lower housing (Figure 9, Item 3),
and three gaskets (Figure 9, Item 4) from machine. Discard gaskets.
Figure 9. Lower Aftercooler Housing.
0068
END OF TASK
CLEANING AND INSPECTION
00068
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
