14
TM 5-2410-241-23-2
FIELD MAINTENANCE
-
SECONDARY FUEL FILTER, BASE AND HOSE REPLACEMENT
00
72
Secondary Fuel Filter Removal, Secondary Filter Hose and Base Removal,
Cleaning and Inspection, Secondary Filter Hose and Base Installation, Secondary Fuel Filter Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
0
0
Tool Kit, General Mechanic's
Gasket
0
(WP 0302, Item 65)
O-ring (14)
0
0
Gloves, Rubber (S0208)
References
(WP 0302, Item 68)
0
0
Goggles (S0209) (WP 0302, Item 68)
0
0
WP 0295
Pan, Drain (S0255) (WP 0302, Item 68)
0
0
Wrench, Oil Filter (S0981)
Equipment Condition
0
(WP 0302, Item 68)
0
Machine parked (TM 5-2410-241-10)
0
Materials/Parts
0
Drawing Required
0
Cap Set, Protective (WP 0303, Item 4)
0
TM 5-2410-241-24P, Figure 23
0
Rag, Wiping (WP 0303, Item 24)
0
Estimated Time to Complete
Tag, Marker (WP 0303, Item 34)
0
0
1.5 Hr
0
WARN I N G
DO NOT perform fuel system checks, inspecions, or maintenance while smoking or near
t
fire, flames, or sparks. Fuel may ignite, causing damage to equipment and injury or death
to personnel.
Allow engine to cool off before performing maintenance on fuel filter. Hot metal parts can
cause severe burns. Wear eye, glove, and skin protection when working with heated
parts.
Wear fuel resistant gloves and eye protection when handling fuels. If exposed to fuel,
promptly wash exposed skin and change fuel-soaked clothing.
Failure to follow these warningsmay result in injury or death to personnel, or damage to
equipment.
0072-1
