TM 5-2410-241-23-2
0072
SECONDARY FILTER HOSE AND BASE REMOVAL CONTINUED
N OT E
Tag electrical connectors and hoses to aid installation.
Cap all lines and hoses to prevent contamination.
3. Remove dipstick tube (WP 0087).
4. Disconnect electrical connector (Figure 5, Item 1) from filter base (Figure 5, Item 2).
5. Loosen filter (Figure 5, Item 19) from filter base (Figure 5, Item 2).
6. Disconnect hose (Figure 5, Item 18) from filter base (Figure 5, Item 2). Position hose aside.
7. Remove bolt (Figure 5, Item 13), washer (Figure 5, Item 12), clamp (Figure 5, Item 11), spacer (Figure 5,
Item 10) from engine (Figure 5, Item 20) and hose (Figure 5, Item 6).
8. Remove nut (Figure 5, Item 9), washer (Figure 5, Item 8) clamp (Figure 5, Item 7) from engine (Figure 5,
Item 20) and hose (Figure 5, Item 6).
9. Loosen tube nut (Figure 5, Item 5) and remove hose (Figure 5, Item 6) from fitting (Figure 5, Item 3).
10. Remove fitting (Figure 5, Item 3) and O-ring (Figure 5, Item 4) from filter base (Figure 5, Item 2). Discard O-
ring.
11. Loosen tube nut (Figure 5, Item 15) and remove hose (Figure 5, Item 6) from fitting (Figure 5, Item 16).
12. Remove fitting (Figure 5, Item 16) from fitting (Figure 5, Item 17).
13. Remove fitting (Figure 5, Item 17) and O-ring (Figure 5, Item 14) from engine (Figure 5, Item 20). Discard O-
ring.
14. Remove hose (Figure 5, Item 6) and filter (Figure 5, Item 19) from engine (Figure 5, Item 20) and filter base
(Figure 5, Item 2).
Figure 5. Filter Drain Tube.
0072