TM 5-2410-241-23-2
0072
SECONDARY FILTER HOSE AND BASE INSTALLATION CONTINUED
N OT E
Install electrical connectors and hoses as tagged during removal.
7. Loosely install filter (Figure 8, Item 19) on filter base (Figure 8, Item 2).
8. Position hose (Figure 8, Item 6) on engine (Figure 8, Item 20).
9. Install new O-ring (Figure 8, Item 14) and fitting (Figure 8, Item 17) on engine (Figure 8, Item 20).
10. Install fitting (Figure 8, Item 16) on fitting (Figure 8, Item 17).
11. Install hose (Figure 8, Item 6) and tighten tube nut (Figure 8, Item 15) on fitting (Figure 8, Item 16).
12. Install new O-ring (Figure 8, Item 4) and fitting (Figure 8, Item 3) on filter base (Figure 8, Item 2).
13. Install hose (Figure 8, Item 6) and tighten tube nut (Figure 8, Item 5) on fitting (Figure 8, Item 3).
14. Install clamp (Figure 8, Item 7), washer (Figure 8, Item 8) and nut (Figure 8, Item 9) on hose (Figure 8, Item 6)
and engine (Figure 8, Item 20).
15. Install spacer (Figure 8, Item 10), clamp (Figure 8, Item 11), washer (Figure 8, Item 12), and bolt (Figure 8,
Item 13) on hose (Figure 8, Item 6) and engine (Figure 8, Item 20).
16. Connect hose (Figure 8, Item 18) to filter base (Figure 8, Item 2).
17. Tighten filter (Figure 8, Item 19) on filter base (Figure 8, Item 2).
18. Connect electrical connector (Figure 8, Item 1) to filter base (Figure 8, Item 2).
19. Install dipstick tube (WP 0087).
Figure 8. Filter Drain Tube.
0072