TM 5-2410-241-23-2
0072
SECONDARY FILTER HOSE AND BASE REMOVAL CONTINUED
N OT E
Pin (Figure 6, Item 6) comes assembled to spacer (Figure 6, Item 4). Do not remove pin.
15. Remove two bolts (Figure 6, Item 12) washers (Figure 6, Item 7), filter base (Figure 6, Item 18), O-ring
(Figure 6, Item 3), spacer (Figure 6, Item 4) and two O-rings (Figure 6, Item 5) from fuel manifold (Figure 6,
Item 2). Discard O-rings.
N OT E
Note position and location of bolts to aid in assembly.
16. Remove two bolts (Figure 6, Item 15), washers (Figure 6, Item 14), cover (Figure 6, Item 16) and gasket
(Figure 6, Item 17) from filter base (Figure 6, Item 18). Discard gasket.
17. Remove plug (Figure 6, Item 21), cap (Figure 6, Item 1), fitting (Figure 6, Item 22) and three O-rings (Figure 6,
Items 19, 20 and 23) from filter base (Figure 6, Item 18). Discard O-rings.
18. Remove fuel temperature sensor (Figure 6, Item 9) and O-ring (Figure 6, Item 8) from filter base (Figure 6,
Item 18). Discard O-ring.
19. Remove plug (Figure 6, Item 10) and O-ring (Figure 6, Item 11) from filter base (Figure 6, Item 18). Discard O-
ring.
20. Remove fitting (Figure 6, Item 13) from filter base (Figure 6, Item 18).
Figure 6. Filter and Base.
0072
END OF TASK