TM 5-2410-241-23-2
0096
INSPECTION
00096
N OT E
If belt is worn or damaged, replace belt.
1. Inspect belt (Figure 1, Item 1) for damage, cracking, or excessive wear.
2. Use belt tension gauge to check deflection on belt (Figure 1, Item 1). Belt deflection should not be more than
0.58 to 0.81 in. (14 to 20 mm) with 25 lb (110 N) of force.
Figure 1. A/C Compressor V-Belt Inspection.
0096
END OF TASK
