TM 5-2410-241-23-2
0118
FLANGE AND THREADED FITTING TYPE HOSE INSTALLATION
000118
N OT E
Hydraulic hoses, fittings, and clamps are all installed in generally the same method. This
procedure covers installation of one hydraulic hose assembly on machine.
This procedure will install onehose with flange at one end and threaded fitting at other
end. Follow the same procedure for additional hoses with flanges at one end and threaded
fitting at other end.
Install lines and hoses as noted during removal.
1. Install hose (Figure 5, Item 5) on machine.
2. Install two clamps (Figure 5, Item 8), washers (Figure 5, Item 7), and bolts (Figure 5, Item 6) on hose (Figure 5,
Item 5).
3. Install two new O-rings (Figure 5, Items 1 and 3) and fitting (Figure 5, Item 2) on filter base (Figure 5, Item 14).
4. Install hose (Figure 5, Item 5) and tube nut (Figure 5, Item 4) on fitting (Figure 5, Item 2).
5. Install new O-ring (Figure 5, Item 9) and two flanges (Figure 5, Item 10) on hose (Figure 5, Item 5).
6. Install hose (Figure 5, Item 5), four washers (Figure 5, Item 11), and bolts (Figure 5, Item 12) on pump
(Figure 5, Item 13).
0118-10