TM 5-2410-241-23-2
0137
INSTALLATION
000137
N OT E
This procedure will install one sprocket segment. Follow same procedure for additional
sprocket segments.
1. Install five washers (Figure 1, Item 4) and bolts (Figure 1, Item 5) on final drive (Figure 1, Item 1).
2. Install sprocket segment (Figure 1, Item 2) and five nuts (Figure 1, Item 3) on final drive (Figure 1, Item 1).
3. Tighten nuts (Figure 1, Item 3) to 221 lb-ft (300 Nm).
4. Tighten nuts (Figure 1, Item 3) an additional 1/3 turn.
5. Check torque on nuts (Figure 1, Item 3). Minimum torque on nuts is 420 lb-ft (570 Nm).
END OF TASK
FOLLOW-ON TASKS
000137
Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
0137-3/(4 blank)