TM 5-2410-241-23-2
0170
CLEANING AND INSPECTION
000170
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000170
N OT E
Install connectors as noted during removal.
Install tiedown straps as noted in removal.
Route harness as noted during removal.
1. Install fuel tank harness (Figure 1, Item 4) and new tiedown straps (Figure 1, Item 3) on fuel tank (Figure 1,
Item 5).
2. Install two clips (Figure 1, Item 6), washer (Figure 1, Item 7), and bolt (Figure 1, Item 8) on fuel tank (Figure 1,
Item 5).
3. Install two connectors (Figure 1, Item 9) on clips (Figure 1, Item 6).
4. Connect connector (Figure 1, Item 1) to fuel sending unit (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
000170
1. Install fuel tank (WP 0171)
2. Fill fuel tank (TM 5-2410-241-10).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
0170-3/(4 blank)