TM 5-2410-241-23-3
0198
REMOVAL CONTINUED
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
N OT E
It may be necessary to remove or loosenother hoses to gain access to bolts.
Note position and orientation of each hose to aid installation.
Hoses will be removed fom engine compartment.
r
15. Remove eight bolts (Figure 10, Item 5), washers (Figure 10, Item 6), and two flanges (Figure 10, Item 1) from
two hoses (Figure 10, Item 4).
16. Disconnect two hoses (Figure 10, Item 4) from control valve (Figure 10, Item 2), and remove and discard two
O-rings (Figure 10, Item 3).
Figure 10. Control Valve.
0198
END OF TASK
